Saving Settings to Memory and Using Saved Settings
91
You can save customized settings and then select the saved settings whenever
you want to use them.
a
Turn on the projector and display an image.
b
Press the [Menu] button, select the Settings menu, and press [Enter].
c
Select Memory and press [Enter].
d
Select one of the following options:
• Load Memory lets you overwrite your current settings with saved
settings.
a
You can save the following settings:
• Image menu settings
• Color Matching in the Extended menu
• Save Memory lets you save your current settings to memory (10
memories with different names are available).
a
A memory name that has already been used is indicated by a
blue mark. Saving over a previously saved memory overwrites
the settings with your current settings.
• Erase Memory lets you erase the selected memory settings.
• Rename Memory lets you rename a saved memory.
e
Press [Menu] or [Esc] to exit the menus.
a
• The saved Color Mode is displayed on the right of the memory
name.
• To delete all saved memories, select Reset Memory in the projector's
Reset menu.
To Next Page
Loading...
