Shutting Off the Image and Sound Temporarily
85
You can temporarily turn off the projected image and sound if you want to
redirect your audience's attention during a presentation. Any sound or video
action continues to run, however, so you cannot resume projection at the
point that you stopped it.
a
Press the [A/V Mute] button on the control panel or remote control.
The light source turns off and the projected image and sound are
interrupted.
b
To turn the image and sound back on, press [A/V Mute] again.
a
• The projector's power automatically turns off 30 minutes after A/V
Mute is enabled. You can disable this feature.
s Extended > Operation > A/V Mute Settings > A/V Mute Timer
• If you selected A/V Mute as the A/V Mute Release setting in the
Extended menu, you can still control the projector while A/V Mute
is enabled.
s Extended > Operation > A/V Mute Settings > A/V Mute
Release
gg Related Links
• "Projector Setup Settings - Extended Menu" p.158
To Next Page
Loading...
