Using Multiple Projectors
96
a
The adjustment screen changes each time you press [Enter].
k
Press [Esc] to return to the area selection screen.
l
Repeat these steps to adjust each area.
m
Press [Esc] to return to the previous screen.
Adjusting RGBCMY
You can adjust the Hue, Saturation, and Brightness settings for R (red), G
(green), B (blue), C (cyan), M (magenta), and Y (yellow) color components.
Turn on all the projectors and select the RGBCMY setting in each projector's
Extended menu so that the color tone on the combined screen becomes
entirely even.
a
Press the [Menu] button, select the Extended menu, and press [Enter].
b
Select Multi-Projection and press [Enter].
c
Select RGBCMY and press [Enter].
d
Select the color to adjust, and press [Enter].
e
Do the following as necessary for each setting:
• To adjust the overall hue of the color, bluish - greenish - reddish,
adjust the Hue setting.
To Next Page
Loading...
