Epson EH-LS500B - Connecting Video Equipment

Preparing
18
f
Connect the USB power cable to the
USB port (type B) on the streaming
media player.
g
Place the streaming media player in
the storage space.
Arrange the cables as shown in the
following diagram.
h
Replace the storage space cover.
Attention
Make sure the cables are not caught by
the cover. You cannot close the cover if
it catches on the cables.
i
Replace the front cover.
Connecting Video Equipment
To project images from DVD/Blu-ray players, connect to the projector using an HDMI cable (commercially
available).
c
•
To display signals in the 18 Gbps transmission band, such as 4k60p/4:4:4, use a premium HDMI cable.
If you use a cable that does not support it, images may not be displayed properly. If you experience
any trouble displaying images at 18 Gbps, change the EDID setting to Normal.
s Signal - Advanced -
EDID p.59
•
You can also connect your AV system to enjoy the audio from connected equipment.