EasyManuals Logo

Epson EH-LS500B User Manual

Epson EH-LS500B
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
Basic Operations
22
Projecting Images
Turning On the Projector
a
Connect the equipment to the
projector.
b
Connect using the power cord
supplied.
c
Remove the lens cap.
Attention
If the projector is turned on while the lens
cap is attached, the lens cap becomes
hot due to the light from the projector.
Make sure you remove the cap before
turning on the projector.
d
Press the standby button on the
remote control or on top of the
projector to turn it on.
Remote control Top of projector
The projector's status indicator flashes blue
as the projector warms up. Once the
projector is warmed up, the standby
indicator and the status indicator turn blue.
c
When Direct Power On is set to
On, you can start projecting by
simply connecting the power
cord to the projector without
having to press any buttons.
s Extended - Operation -
Direct Power On p.63
If you turn on Quick Startup from
the Extended menu, the
projector will be ready to project
in a just a few seconds the next
time it is turned on.
s Extended - Operation -
Quick Startup p.63
e
Turn on the connected equipment.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EH-LS500B and is the answer not in the manual?

Epson EH-LS500B Specifications

General IconGeneral
Matrix size0.62 \
Number of colors1.073 billion colors
Native aspect ratio16:9
Projection distance0.4 - 0.82 m
Projection technology3LCD
Contrast ratio (typical)2500000:1
Screen size compatibility65 - 130 \
Projector native resolution-
Keystone correction, horizontal-3 - 3 °
Projector brightness (economic mode)1200 ANSI lumens
Cables includedAC
Smart TVNo
Ethernet LAN (RJ-45) ports1
Audio (L/R) in0
HDMI connector typeFull-size
HDMI ports quantity3
Serial interface typeRS-232C
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)5 - 35 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.5 W
Power consumption (typical)366 W
Power consumption (economy mode)230 W
Video color modesBright cinema, Cinema, Dynamic, Game
Supported 3D formatsSide by side, Top and bottom
Throw ratio0.27 - 0.37:1
Fixed focal length3.9 mm
Focal length range- mm
Aperture range (F-F)1.5 - 1.5
PlacementDesktop
Product typeUltra short throw projector
Product colorBlack
Cable lock slot typeKensington
Light source typeLaser
Service life of light source20000 h
RMS rated power10 W
Noise level37 dB
Country of originPhilippines
Noise level (economic mode)23 dB
Quantity per pack1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth375 mm
Width458 mm
Height228 mm
Weight9300 g
Package depth590 mm
Package width350 mm
Package height532 mm
Package weight12.954 g

Related product manuals