Maintenance
88
f
Select Start Adjustments, and then
press the [Enter] button.
First, select Shift the whole panel and
adjust the entire LCD display. When a
confirmation message is displayed, press
the [Enter] button to start the adjustment.
c
The image may become distorted
while adjusting. The image is
restored once adjustments are
complete.
g
Use the up/down/left/right buttons to
adjust, and then press the [Enter]
button.
h
To make more detailed adjustments,
select Adjust the four corners, and
then press the [Enter] button to
confirm the selection.
i
Use the up/down/left/right buttons to
make adjustments, and then press the
[Enter] button to move to the next
adjustment point.
j
When you have adjusted all four
corners, select Exit, and then press the
[Enter] button.
If you feel you still need to make
adjustments after correcting all four points,
select Select intersection and adjust and
then continue making adjustments.
To Next Page
Loading...
