Troubleshooting
102
Indicators Status Remedy
(blue)/(orange)
Internal error
The projector has malfunctioned.
Remove the power plug from the electrical outlet, and
contact your local dealer or the nearest Epson repair
center.
s Epson Projector Contact List
(blue)/(orange)
Fan error
Sensor error
Light sensor error
(blue)/(orange)
Cinema filter error
Static iris error
Lens cover error
(blue)/(orange)
Laser driver error
(blue)/(orange)
Fatal error
(blue)/(orange)
Laser error
Laser light failure
There is a problem with the laser section, or it failed to
turn on.
•
When using at an altitude of 1500 m or more, set High
Altitude Mode to On.
s Settings - Operation - High
Altitude Mode p.91
•
If the problem does not improve even after trying the
solutions mentioned above, stop using the projector and
remove the power plug from the electrical outlet. Con-
tact your local dealer or the nearest Epson repair center.
s Epson Projector Contact List