Preparing
10
Control Panel
Buttons/Indicators Function
a
Flashes orange if the internal temperature is too high. Shows the projector's
errors through a combination of other indicators lit and flashing.
s p.101
b
Lit orange when an error occurs in the laser section. Shows the projector's errors
through a combination of other indicators lit and flashing.
s p.101
c
Flashes to indicate warm-up in progress or cool-down in progress. Shows the
projector's status through a combination of other indicators lit and flashing.
s p.101
d
Lit when the projector is on. Shows the projector's errors through a combina-
tion of other indicators lit and flashing.
s p.101
e
Turns the projector power on or off. s p.27
f
Changes to the image from each input port. s p.34
g
Changes the adjustment item for the motorized lens function.
The following adjustment items are available.
•
Focus s p.32
•
Zoom s p.33
•
Lens shift s p.33
h
Displays and closes the Configuration menu. s p.29
On the Configuration menu, you can make adjustments and settings for Signal,
Image, Input Signal, and so on.
s p.86
To Next Page
Loading...
Need help?
General
