Basic Operations
43
Converting 2D Images to 3D Images and Viewing
You can convert 2D images to 3D images from HDMI1, HDMI2, or WirelessHD (EH-LS9600W only).
a
Press the button, select Signal -
3D Setup from the Configuration
menu, and then press the
button
to confirm the selection.
The 3D Setup screen is displayed.
b
Select 2D-to-3D Conversion, and
then press the
button to confirm
the selection.
c
Select the strength of the 3D effect,
and then press the
button to
confirm the selection.
d
Press the button to exit the
menu.
c
When 3D Display is set to Off,
press the
button on the
remote control after making
settings.
c
•
When using 2D-to-3D Conversion, set 3D Format to Auto or 2D. s Signal - 3D Setup - 3D
Format p.88
•
This cannot be set when Image Processing is set to Fast in the Signal menu. s Signal - Advanced
- Image Processing p.88