EasyManuals Logo

Epson EH-LS9600e User Manual

Epson EH-LS9600e
135 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #88 background imageLoading...
Page #88 background image
Configuration Menu
87
Function Menu/Settings Explanation
Advanced
Gamma 2, 1, 0, -1, -2 Performs gamma adjustments. You can
select a raw value or adjust the gamma
while looking at the image or graph.
s p.51
Customized
Adjust it from the im-
age, Adjust it from the
graph
Reset
RGB Offset R/G/B
Adjusts the offset and gain for each R, G,
and B color.
s p.52
Gain R/G/B
RGBCMY R/G/B/C/M/Y Hue, Satura-
tion, Bright-
ness
Adjusts the hue, saturation, and bright-
ness for each R, G, B, C, M, and Y color.
s p.50
EPSON Super White
*5
On, Off
(This can only be set when the Color
Mode is set to Natural, THX, Cinema,
Adobe RGB, Digital Cinema, 3D Cine-
ma, or 3D THX and when receiving signal
input from the HDMI1 or HDMI2 ports, or
from WirelessHD.)
Set this to On if you are experiencing
bright over exposure of whites in your im-
age. When set to On, HDMI Video Range
settings are disabled.
Color Gamut HDTV, EBU, SMPTE-C Sets the color gamut to match the stand-
ard for the video devices being used.
s p.59
Power Con-
sumption
High, Medium, ECO
*6
You can set the brightness to one of three
settings.
Select ECO if the images being projected
are too bright. When ECO is selected, pow-
er consumption during projection decrea-
ses, and fan rotation noise is reduced.
Dynamic Con-
trast
Off, Normal, High Speed You can change the luminance adjust-
ment tracking for changes in brightness in
the displayed image. Set to Off for no lu-
minance adjustment.
s p.48
Lens Iris
Adjusts the amount of light entering the
lens with the lens diaphragm, which ad-
justs the contrast of the image.
s p.55
Reset
Yes, No You can reset all adjustment values for
Image to their default settings.
*1
This may not be displayed depending on the model you are using.
*2
Only EH-LS10000 is displayed.
*3
This is not displayed when a computer image signal is being input.
*4
When Color Mode is set to Natural, THX, Adobe RGB, or 3D THX the settings change to 5000K - 10000K.
*5
Settings are saved for each type of input source or Color Mode.
*6
When Color Mode is set to THX, the settings change to Extra Bright, Normal, and ECO.

Table of Contents

Other manuals for Epson EH-LS9600e

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EH-LS9600e and is the answer not in the manual?

Epson EH-LS9600e Specifications

General IconGeneral
BrandEpson
ModelEH-LS9600e
CategoryProjector
LanguageEnglish

Related product manuals