EasyManuals Logo

Epson EH-LS9600e User Manual

Epson EH-LS9600e
135 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #98 background imageLoading...
Page #98 background image
Configuration Menu
97
Function Explanation
Web Control Password
Set a password to use Web Control. You can enter up to 32 single-byte alpha-
numeric characters. (* cannot be used.) Web Control is a function that allows you
to change the projector's settings by using the Web browser on a computer or
smart device connected to the network.
s p.81
Wired LAN menu
Function Menu/Settings Explanation
IP Settings
DHCP On, Off
Set whether or not (On/Off) to use DHCP. If this
is set to On, you cannot set any more addresses.
IP Address Enter the IP address assigned to the projector.
You can enter a number from 0 to 255 in each
field of the address. However, the following IP
addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255
(where x is a number from 0 to 255)
Subnet Mask Enter the projector's subnet mask.
You can enter a number from 0 to 255 in each
field of the address. However, the following sub-
net masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address Enter the projector's gateway IP address.
You can enter a number from 0 to 255 in each
field of the address. However, the following gate-
way addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255
(where x is a number from 0 to 255)
IP Address Display
On, Off Set to Off to prevent the IP address from being
displayed on the Net. Info. - Wired LAN or Web
Control screen.
Mail menu
When this is set, you receive an email notification if a problem or warning occurs in the projector.
Function Menu/Settings Explanation
Mail Notification
On, Off Set to On to send an email to the preset addresses
when a problem or warning occurs with a pro-
jector.
SMTP Server
- Enter the IP address for the SMTP server for the
projector.
You can enter a number from 0 to 255 in each
field of the address. However, the following IP
addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x
is a number from 0 to 255)
Port Number
1 - 65535 Enter the port number for the SMTP server. The
default value is 25. You can input numbers be-
tween 1 to 65535.

Table of Contents

Other manuals for Epson EH-LS9600e

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EH-LS9600e and is the answer not in the manual?

Epson EH-LS9600e Specifications

General IconGeneral
BrandEpson
ModelEH-LS9600e
CategoryProjector
LanguageEnglish

Related product manuals