Name: Epson EH-TW5700
Brand: Epson
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Adjusting the Image

Use the up and down buttons to select

the aspect mode, and then press the

[Enter] button to confirm the

selection.

Auto may not be available depending on the type of input signal.

By normally selecting Auto, the optimum aspect is used to display the input signal. Change the setting if you

want to use a different aspect.

The table below shows the image projected on a 16:9 screen.

Aspect Mode Aspect Ratio for Input Signal

16:10 16:9 4:3

Normal

Full

Zoom

Adjusting the Sharpness

You can make the image clearer.

Press the [Menu] button to display

menus in the order Image -

Sharpness.

Remote control Control panel

The Sharpness adjustment screen is

displayed.

Use the left and right buttons to make

adjustments.

The image is enhanced when moved to the

right (positive) and softer when moved to

the left (negative).

Press the [Menu] button to exit the

menu.

Questions and Answers:

Need help?

Do you have a question about the Epson EH-TW5700 and is the answer not in the manual?

Epson EH-TW5700 Specifications

General

Heat dissipation	1009.8 BTU/h
Number of colors	1.073 billion colors
Native aspect ratio	16:9
Projection distance	2.71 - 2.61 m
Projection technology	3LCD
Contrast ratio (typical)	35000:1
Screen size compatibility	34 - 332 \
Projector native resolution	1080p (1920x1080)
Keystone correction, horizontal	-30 - 30 °
Placement	Ceiling
Product type	Standard throw projector
Product color	White
Market positioning	-
Lamp type	UHE
Lamp power	200 W
Light source type	Lamp
Service life of light source	4500 h
Service life of light source (economic mode)	7500 h
Focus	Manual
Focal length range	16.9 - 20.28 mm
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	297 W
Video color modes	Bright cinema, Cinema, Dynamic, Natural
DVI port	No
HDMI version	1.4
HDMI connector type	Full-size
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.