EasyManuals Logo

Epson EH-TW5700 User Manual

Epson EH-TW5700
93 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #74 background imageLoading...
Page #74 background image
Maintenance
73
Caution
Do not touch the lamp cover immediately after turning off the projector as it is still hot. Wait until the lamp
has cooled down sufficiently before removing the lamp cover. Otherwise, you could get burnt.
We recommend the use of genuine EPSON option lamps. The use of non-genuine lamps may affect projection
quality and safety.
Any damage or malfunction caused by the use of non-genuine lamps may not be covered by Epson's warranty.
a
Press the standby button on the
remote control or the control panel to
turn off the power, and then
disconnect the power cord.
b
Loosen the lamp cover fixing screw.
c
Remove the lamp cover.
Slide the lamp cover straight and remove it.
d
Loosen the two lamp fixing screws.
e
Remove the old lamp.
Grip the projection and pull it straight out.
f
Install the new lamp.
Make sure the lamp is facing the correct
direction and press it in.
g
Tighten the two lamp fixing screws.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EH-TW5700 and is the answer not in the manual?

Epson EH-TW5700 Specifications

General IconGeneral
Heat dissipation1009.8 BTU/h
Number of colors1.073 billion colors
Native aspect ratio16:9
Projection distance2.71 - 2.61 m
Projection technology3LCD
Contrast ratio (typical)35000:1
Screen size compatibility34 - 332 \
Projector native resolution1080p (1920x1080)
Keystone correction, horizontal-30 - 30 °
PlacementCeiling
Product typeStandard throw projector
Product colorWhite
Market positioning-
Lamp typeUHE
Lamp power200 W
Light source typeLamp
Service life of light source4500 h
Service life of light source (economic mode)7500 h
FocusManual
Focal length range16.9 - 20.28 mm
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.3 W
Power consumption (typical)297 W
Video color modesBright cinema, Cinema, Dynamic, Natural
DVI portNo
HDMI version1.4
HDMI connector typeFull-size
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Weight and Dimensions IconWeight and Dimensions
Depth315 mm
Width309 mm
Height122 mm
Weight3600 g

Related product manuals