Epson EH-TW9100W User Manual

Configuration Menu
69
Function Menu/Settings Explanation
Advanced
Gamma 2.0, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6 Performs gamma adjustments. You can
select a raw value or adjust the gamma
while looking at the image or graph.
s p.35
(The values that can be selected change
depending on the Color Mode setting,
and 2.0 - 2.4 or 2.2 - 2.6 are displayed.)
Customized Adjust it from the im-
age, Adjust it from the
graph
Reset
RGB Offset R/G/B
Adjusts the offset and gain for each R, G,
and B color.
s p.36
Gain R/G/B
RGBCMY R/G/B/C/M/Y Hue, Satura-
tion, Bright-
ness
Adjusts the hue, saturation, and bright-
ness for each R, G, B, C, M, and Y color.
s p.34
EPSON Super
White
*2 *3
On, Off
(This can only be set when the Color
Mode is set to Auto, Natural, Cinema,
or3D Cinema and when receiving signal
input from the HDMI1 or HDMI2 ports, or
from WirelessHD.)
Set this to On if you are experiencing
bright over exposure of whites in your im-
age. When set to On, HDMI Video Range
settings are disabled.
Color Gam-
ut
*4
HDTV, EBU, SMPTE-C Sets the color gamut to match the stand-
ard for the video device being used.
s p.41
Power Con-
sumption
Normal, ECO You can set the lamp brightness to one of
two settings.
Select ECO if the images being projected
are too bright. When ECO is selected, pow-
er consumption during projection decrea-
ses, and fan rotation noise is reduced.
Auto Iris
Off, Normal, High Speed You can change the luminance adjust-
ment tracking for changes in brightness in
the displayed image. Set to Off for no lu-
minance adjustment.
s p.39
Reset
Yes, No You can reset all adjustment values for
Image to their default settings.
*1
This is not displayed when a computer image signal is being input.
*2
This is only displayed when a Component, HDMI1, HDMI2, or WirelessHD image signal is being input.
(WirelessHD is for EH-TW9100W/EH-TW8100W only.)
*3
Settings are saved for each type of input source or signal.
*4
Only EH-TW9100W/EH-TW9100 is displayed.

Epson EH-TW9100W Specifications

General

RS-232 ports	1
Matrix size	0.74 \
White light output	2400 ANSI lumens
Projection distance	- m
Projection technology	3LCD
Screen size compatibility	30 - 300 \
Projection distance (tele)	1.9 - 19.2 m
Projection distance (wide)	0.9 - 9 m
Projector native resolution	1080p (1920x1080)
Keystone correction, vertical	-30 - 30 °
Full HD	Yes
Color modes (2D)	Dynamic, Cinema
Supported 3D formats	Side by side, Top and bottom, Frame packing
Analog signal format system	-
Focus	Manual
Focal length range	23 - 47 mm
Aperture range (F-F)	2 - 3.17
Vertical lens shift range	-96.3 - 96.3 %
Horizontal lens shift range	-47.1 - 47.1 %
Lamp type	E-TORL
Lamp power	230 W
Light source type	Lamp
Service life of light source	4000 h
Service life of light source (economic mode)	5000 h
DVI port	No
Serial interface type	RS-232
USB 2.0 ports quantity	0
Noise level	- dB
Country of origin	China
2D/3D frequency image	240/480 Hz
Noise level (economic mode)	22 dB
Placement	Desktop
Product type	Standard throw projector
Product color	White
Market positioning	Home cinema
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.39 W
Power consumption (typical)	340 W
Power consumption (economy mode)	287 W
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	5 - 35 °C
Pallet width	800 mm
Pallet height	2244 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pack	1 pc(s)
Quantity per pallet	12 pc(s)
Quantity per pallet layer	2 pc(s)

Weight and Dimensions

Depth	395 mm
Width	466 mm
Height	140 mm
Weight	8400 g
Package depth	573 mm
Package width	531 mm
Package height	350 mm
Package weight	13050 g