EasyManuals Logo

Epson EH-TW9100W User Manual

Epson EH-TW9100W
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #85 background imageLoading...
Page #85 background image
Troubleshooting
84
Check Remedy
Has condensation formed on the lens? If the projector is suddenly taken from a cold environment to a
warm environment, or if sudden ambient temperature changes
occur, condensation may form on the surface of the lens, and this
may cause the images to appear fuzzy. Set the projector up in
the room about one hour before it is used. If the projector is wet
from condensation, turn off the projector, disconnect the power
cable, and leave it for a while.
Interference or distortion appear in images
Check Remedy
Is the image signal format setting correct? When Video is input
If nothing is projected even when Video Signal is set to Auto
from the configuration menu, set the signal that matches the
connected device.
s Extended - Input Signal - Video Sig-
nal p.75
When Component is input
If nothing is projected even when Component is set to Auto
from the configuration menu, set the signal that matches the
connected device.
s Extended - Input Signal - Compo-
nent p.75
Are the cables connected correctly?Check that all the cables required for projection are securely
connected.
s p.19
Is an extension cable being used? If an extension cable is used, electrical interference may affect
the signals.
(Only when projecting computer image sig-
nals)
Are the Sync. and Tracking settings adjusted
correctly?
The projector uses automatic adjustment functions to project at
the optimum status. However, depending on the signal, some
may not be adjusted correctly even after performing self correc-
tions. If this happens, adjust the Tracking and Sync. settings
from the configuration menu.
s Signal - Tracking/Sync. p.70
(Only when projecting computer image sig-
nals)
Is the correct resolution selected?
Set the computer so that the signals being output are compatible
with the projector.
s p.98
Part of the image is truncated (large) or small
Check Remedy
Is the correct Aspect selected?
Press the
button, and then select the Aspect that match-
es the input signal.
s Signal - Aspect p.70
When subtitled images are being projected during Zoom, adjust
the Zoom Caption Pos. setting from the configuration menu.
s Signal - Zoom Caption Pos. p.70
Is the image Position adjusted correctly? Adjust the Position setting from the configuration menu.
s Signal - Position p.70
(Only when projecting computer image sig-
nals)
Is the correct resolution selected?
Set the computer so that the signals being output are compatible
with the projector.
s p.98

Table of Contents

Other manuals for Epson EH-TW9100W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EH-TW9100W and is the answer not in the manual?

Epson EH-TW9100W Specifications

General IconGeneral
RS-232 ports1
Matrix size0.74 \
White light output2400 ANSI lumens
Projection distance- m
Projection technology3LCD
Screen size compatibility30 - 300 \
Projection distance (tele)1.9 - 19.2 m
Projection distance (wide)0.9 - 9 m
Projector native resolution1080p (1920x1080)
Keystone correction, vertical-30 - 30 °
Full HDYes
Color modes (2D)Dynamic, Cinema
Supported 3D formatsSide by side, Top and bottom, Frame packing
Analog signal format system-
FocusManual
Focal length range23 - 47 mm
Aperture range (F-F)2 - 3.17
Vertical lens shift range-96.3 - 96.3 %
Horizontal lens shift range-47.1 - 47.1 %
Lamp typeE-TORL
Lamp power230 W
Light source typeLamp
Service life of light source4000 h
Service life of light source (economic mode)5000 h
DVI portNo
Serial interface typeRS-232
USB 2.0 ports quantity0
Noise level- dB
Country of originChina
2D/3D frequency image240/480 Hz
Noise level (economic mode)22 dB
PlacementDesktop
Product typeStandard throw projector
Product colorWhite
Market positioningHome cinema
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.39 W
Power consumption (typical)340 W
Power consumption (economy mode)287 W
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)5 - 35 °C
Pallet width800 mm
Pallet height2244 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pack1 pc(s)
Quantity per pallet12 pc(s)
Quantity per pallet layer2 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth395 mm
Width466 mm
Height140 mm
Weight8400 g
Package depth573 mm
Package width531 mm
Package height350 mm
Package weight13050 g

Related product manuals