Using the Document Camera 23
5. Place your presentation material on the stage. You should see an
image on screen.
Once you see your image, turn to page 25 for instructions on making
adjustments.
If your image doesn’t appear, see the next section for help.
When you’re done with your presentation, turn off the document
camera as described on page 37.
What To Do If You See a Blank Screen
If an image doesn’t appear, try the following:
■ Make sure the cables are connected correctly, as described in
Chapter 1.
■ Make sure everything is turned on.
■ If you are using a video source, such as a laptop or desktop
computer, you may need to switch video sources. Press the
RGB1
or RGB2 buttons as described on page 24.
■ If an image still doesn’t appear, refer to Chapter 4 for more help.
note
If you turn off the document
camera, always wait a few
seconds before turning it
back on.
To Next Page
Loading...
