Epson EPL-7500 - Printing a Test File

HP emulation mode
If your application program doesn’t support the PostScript
language, or if you are using a program written specifically for the
HP LaserJet, use the SelecType Level 1 SOFTWARE option to set
your printer to HP emulation mode. Then choose the first printer
available from the list below from your application program’s
printer selection menu.
HP LaserJet series II™
HP LaserJet Plus™
HP LaserJet 500™
HP LaserJet™
If none of these printers are listed among your program’s options,
select any printer that uses the HP Printer Command Language
(PCL).
Printing a test file
After you install the software, create and print a test file using the
fonts, symbols, features and formats that you use most often.
Printing the test file shows you how the EPL-7500 works with
your application program.
Application Software 5-3