Service faults
The service messages listed below are caused by a printer
malfunction and can sometimes be serious:
SCAN MOTOR ERROR
HSYNC ERROR
HEATER LAMP ERROR
MAIN MOTOR ERROR
FAN MOTOR ERROR
If one of these error messages appears, follow the steps below.
1. Press the RESET button.
2.
If the error does not clear, turn the printer off for at least five
seconds. Then turn it back on.
3.
If the problem remains, service is required. Write the message
down and turn the printer off. Then contact a qualified service
person or your dealer.
Troubleshooting 7-5
To Next Page
Loading...
