Test Print
Problem Solution
The test prints or
start pages do not
print.
The paper does not
You may not have set the correct INPUT
feed at all.
paper path. See Chapter 4.
The paper feeds but
nothing is printed.
After entering the TEST PRINT option in
SelecType Level
2,
you may not have
pressed long enough to initiate the
test print. Try running the test again. This
time, however, hold down until the
display shows PRINTING TEST.
The imaging cartridge may need to be
replaced. Replace the imaging cartridge as
described in Chapter 6.
If the test print or start page still does not
print, contact your dealer for assistance.
7-18
Troubleshooting
To Next Page
Loading...
