LOW ON TONER Message
You must change the imaging cartridge as described in the next
section as soon as the LOW ON TONER message appears.
Follow this list of procedures in order whenever you see the LOW
ON TONER message. Detailed instructions are given in the
following sections.
1. Remove the imaging cartridge.
2. Clean the transfer charger wire.
3. Clean the glass lens.
4. Replace the cleaning pad.
5. Install a new imaging cartridge.
Removing the imaging cartridge.
Follow these steps to remove the imaging cartridge:
1.
Make sure the printer is turned off; then unplug the power
cord from the wall outlet.
6-2
Maintenance and Transportation
To Next Page
Loading...
