The Control Panel
CONTINUE
RESET-If you press this button while QUIT
COPY END/RESET THE JOB is on the display, the display changes to
QUITTING THE JOB
and the job is flushed from
the printer’s memory. If you press any other
buttons, the printer returns to its previous status
without printing data.
Select Type
Enters or exits SelecType mode. Press once to
enter Level 1; press twice to enter Level 2. For a
complete description of the two SelecType levels
and their functions, see Chapter 3.
Testing and Connecting Your Printer
2-5
To Next Page
Loading...
