SelecType Options
FACE DOWN*
FACE UP
The printer is factory set for face-down output on top of the
printer. If you want to choose face-up delivery, you must first
install the optional face-up output tray and move the paper path
lever to the FACE UP position. See Appendix A for more
information on installing the optional face-up tray. If you select
FACE UP without installing the face-up tray and moving the paper
path lever, the setting has no effect.
Note: Some application software programs distinguish between
face-down and face-up paper delivery. For those programs, see
your software documentation to set the correct paper delivery.
This option includes the 5 submenus shown below.
RESET LEVEL 1
SAVE LEVEL 1
RECOVERY
VM RAM:XXXXXX
LJ RAM
SelecType
3-13
To Next Page
Loading...
