SelecType Options
The PARALLEL option has one submenu, as shown below:
BUSY DELAY: 0*
BUSY DELAY: + 5
BUSY DELAY: -- 5
This option sets the delay period from the ACKNLG to the BUSY
signal. Available settings are -5, 0, and +5 microseconds. For
most applications, leave this option set to 0 microseconds.
The SERIAL RS232 and SERIAL RS422 options have these
submenus:
BAUD RATE
PARITY
FLOW CONTROL (RS232 only)
STOP BITS
A brief description of each serial interface option follows
300 BAUD
600 BAUD
1200 BAUD
2400 BAUD
4800 BAUD
9600
BAUD*
19200 BAUD
38400 BAUD
57600 BAUD (RS422 only)
SelecType 3-17
To Next Page
Loading...
