SelecType Options
ERROR HANDLER:ON
ERROR HANDLER:OFF*
When this option is on, PostScript errors are printed on the paper
when they occur. When this option is off, they are not. This
feature can be a convenience for programmers using the parallel
interface.
STANDBY:DISALLOWED*
STANDBY:ALLOWED
The standby mode is designed to save power by reducing the
power to the fixing heater whenever no panel buttons are pushed
or data sent to the printer for 30 minutes. In this mode the printer
begins warming up as soon as you press any button or send any
data, becoming ready to print within 70 seconds. The default is
DISALLOWED, which keeps the printer warmed up and ready to
print at all times.
3-22
SelecType
To Next Page
Loading...
