3
Options
3-23
Flamingo
Rev. C
A5 size OPTIONS.FM
11/5/98 Pass 0
R
Proof Sign-off:
M.Takata _______
K.Nishi _______
K.Pipa _______
4. To attach the tray, hook the slots on both sides of the Face-up
Tray to the corresponding pegs.
5. Lower the Face-up Tray.
After installing
1. Reconnect any interface cables you removed.
2. Make sure the printer is turned off. Plug the power cord into
an electrical outlet.
3. Turn on the printer.
4. On the control panel’s Setup Menu, set Face-up Enable to
On. See “Using SelecType” on page 4-3.
To Next Page
Loading...
