3-24
Options
Flamingo
Rev. C
A5 size OPTIONS.FM
11/5/98 Pass 0
L
Proof Sign-off:
M.Takata _______
K.Nishi _______
K.Pipa _______
To confirm that the Face-up Tray is installed correctly, print a
status sheet. If the tray is not listed on the status sheet, try
reinstalling it.
Note:
You can open the DM cover without detaching the Face-up Tray. The
tray remains angled to hold printed sheets.
Removing the Face-up Tray (without the Duplex Unit installed)
To remove the Face-up Tray completely from the printer, follow
the instructions below.
Before removing
1. Turn off the printer.
2. Unplug the printer’s power cord from the electrical outlet.
3. Remove all interface cables from the interface connectors.
To Next Page
Loading...
