If the product is turned off due to a power failure, it automatically restarts and beeps when the power is restored. If you
have set to receive faxes automatically (Auto Answer - On), the setting is also restored. Depending on the
circumstances before the power failure, it may not restart.
Setting Up Fax Features
Setting up speed dial entries
You can create a speed dial list allowing you to select fax recipient numbers quickly when faxing. Up to 60 combined
speed dial and group dial entries can be registered.
A
Enter Fax mode from the Home menu.
B
Press Contacts.
C
Select Add/Edit Contacts.
D
Select Speed Dial Setup. You see the available speed dial entry numbers.
E
Select the speed dial entry number that you want to register. You can register up to 60 entries.
F
Enter a phone number. You can enter up to 64 digits.
Note:
A hyphen ("-") causes a slight pause when dialing. Only include it in phone numbers when a pause is necessary.
Spaces entered between numbers are ignored when dialing.
G
Select Done.
H
Enter a name to identify the speed dial entry. You can enter up to 30 characters.
I
Select Done to register the name.
Setting up group dial entries
You can add speed dial entries to a group, allowing you to send a fax to multiple recipients at the same time. Up to 60
combined speed dial and group dial entries can be entered.
A
Enter Fax mode from the Home menu.
B
Select Contacts.
User’s Guide
Faxing
89
To Next Page
Loading...
