Epson FX-2190IIN Network Guide

Items Setting value and Description
Enable LLMNR Select this to enable LLMNR. You can use name resolution without NetBIOS even if
you cannot use DNS.
LPR Settings
Allow LPR Port Printing Select to allow printing from the LPR port.
Printing Timeout (sec) Enter the timeout value for LPR printing between 0 to 3,600 seconds. If you do not
want to timeout, enter 0.
RAW(Port9100) Settings
Allow RAW(Port9100) Printing Select to allow printing from the RAW port (Port 9100).
Printing Timeout (sec) Enter the timeout value for RAW (Port 9100) printing between 0 to 3,600 seconds. If
you do not want to timeout, enter 0.
RAW(Custom Port) Settings
Allow RAW(Custom Port) Printing Select to allow printing from the RAW port (Custom Port).
Port Number Enter the port number for RAW (Custom Port) printing between 1024 to 65535
except 9100, 1865, and 2968.
Printing Timeout (sec) Enter the timeout value for RAW (Custom Port) printing between 0 to 3,600 seconds.
If you do not want to timeout, enter 0.
IPP Settings
Enable IPP Select to enable IPP communication. Only printers that support IPP are displayed.
You cannot use AirPrint if this is disabled.
Allow Non-secure Communication Select to allow the printer to communicate without any security measures (IPP).
Communication Timeout (sec) Enter the timeout value for IPP printing between 0 to 3,600 seconds.
URL(Network) Displays IPP URLs (http and https) when the printer is connected by wired LAN. The
URL is a combined value of the printer’s IP address, Port number, and IPP printer
name.
Printer Name Displays the IPP printer name.
Location Displays the IPP location.
FTP Settings
Enable FTP Server Select to enable FTP printing. Only printers that support FTP printing are displayed.
Communication Timeout (sec) Enter the timeout value for FTP communication between 0 to 3,600 seconds. If you
do not want to timeout, enter 0.
SNMPv1/v2c Settings
Enable SNMPv1/v2c Select to enable SNMPv1/v2c. Only printers that support SNMPv3 are displayed.
Access Authority
Set the access authority when SNMPv1/v2c is enabled. Select Read Only or Read/
Write.
Community Name (Read Only) Enter 0 to 32 ASCII (0x20 to 0x7E) characters.
Community Name (Read/Write) Enter 0 to 32 ASCII (0x20 to 0x7E) characters.
FX-890IIN/FX-2190IIN/FX-2175IIN Network Guide
Security Settings
33

Epson FX-2190IIN Specifications

General

Color	-
Bitmap fonts	Draft, OCR-B, Roman, Sans Serif
Character sets	Italic, PC437, PC850, PC858, Roman 8
Character pitch	10, 12 cpi
Built-in barcodes	CODABAR (NW-7), Code 128 (A/B/C), Code 39, Industrial 2/5, Matrix 2/5, POSTNET, UPC-A, UPC-E
Maximum resolution	240 x 144 DPI
Number of characters	42
Maximum number of copies	6 copies
Maximum print speed (NLQ)	115 cps
Maximum print speed (draft)	612 cps
Maximum printing width (columns)	136
Print yield	12 characters
Print direction	Bi-directional
Ribbon life (black, draft)	12 million characters
Mean time between failures (MTBF)	25000 h
Sustainability certificates	ENERGY STAR
Standard interfaces	Ethernet, Parallel, USB
Paper tray media types	Envelopes
Single sheet thickness range	0.06 - 0.14 mm
Continuous paper thickness range	0.46 - 0.46 mm
Multi-part paper thickness range	0.12 - 0.46 mm
AC input voltage	198-264 V
Power consumption (standby)	10 W
Power consumption (typical)	55 W
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	5 - 35 °C
Storage relative humidity (H-H)	30 - 60 %
Operating relative humidity (H-H)	10 - 80 %
Product color	Black
Country of origin	Indonesia
Sound pressure level (printing)	55 dB
Needles	18 (2 x 9)
Print technology	Dot matrix
Connectivity technology	Wired
Pallet width	800 mm
Pallet height	2250 mm
Pallet length	1200 mm
Pallet weight	0 g
Pallet width (UK)	1000 mm
Quantity per pallet	14 pc(s)
Quantity per pallet (UK)	21 pc(s)
Quantity per pallet layer	2 pc(s)
Harmonized System (HS) code	84433210
Quantity per pallet layer (UK)	3 pc(s)
Package depth	735 mm
Package width	455 mm
Package height	300 mm
Package weight	12160 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	375 mm
Width	612 mm
Height	177 mm