Epson FX-2190IIN Network Guide

Introduction
Manual Component
This manual explains how to connect the printer to the network and it contains information on how to make settings to
use the functions.
See the User's Guide for function usage information.
Preparation
Explains how to set devices, and the software used for managing.
Connection
Explains how to connect a printer to the network.
Function Settings
Explains the settings for printing.
Security Settings
Explains the security settings, such as administrator password settings and protocol control.
Solving Problems
Explains settings initialization and troubleshooting of the network.
Definitions of Terms Used in this Guide
The following terms are used in this guide.
Administrator
The person in charge of installing and setting the device or the network at an office or organization. For small
organizations, this person may be in charge of both device and network administration. For large organizations,
administrators have authority over the network or devices on the group unit of a department or division, and network
administrators are in charge of the communication settings for beyond the organization, such as the Internet.
Network administrator
The person in charge of controlling network communication. The person who set up the router, proxy server, DNS
server and mail server to control communication through the Internet or network.
User
The person who uses devices such as printers.
Server / client connection (printer sharing using the Windows server)
The connection that indicates the printer is connected to the Windows server through the network or by USB cable,
and the print queue set on the server can be shared. Communication between the printer and the computer goes
through the server, and the printer is controlled on the server.
Peer to peer connection (direct printing)
The connection that indicates the printer and the computer are connected to the network through the hub or access
point, and the print job can be executed directly from the computer.
FX-890IIN/FX-2190IIN/FX-2175IIN Network Guide
Introduction
8

Epson FX-2190IIN Specifications

General

Color	-
Bitmap fonts	Draft, OCR-B, Roman, Sans Serif
Character sets	Italic, PC437, PC850, PC858, Roman 8
Character pitch	10, 12 cpi
Built-in barcodes	CODABAR (NW-7), Code 128 (A/B/C), Code 39, Industrial 2/5, Matrix 2/5, POSTNET, UPC-A, UPC-E
Maximum resolution	240 x 144 DPI
Number of characters	42
Maximum number of copies	6 copies
Maximum print speed (NLQ)	115 cps
Maximum print speed (draft)	612 cps
Maximum printing width (columns)	136
Print yield	12 characters
Print direction	Bi-directional
Ribbon life (black, draft)	12 million characters
Mean time between failures (MTBF)	25000 h
Sustainability certificates	ENERGY STAR
Standard interfaces	Ethernet, Parallel, USB
Paper tray media types	Envelopes
Single sheet thickness range	0.06 - 0.14 mm
Continuous paper thickness range	0.46 - 0.46 mm
Multi-part paper thickness range	0.12 - 0.46 mm
AC input voltage	198-264 V
Power consumption (standby)	10 W
Power consumption (typical)	55 W
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	5 - 35 °C
Storage relative humidity (H-H)	30 - 60 %
Operating relative humidity (H-H)	10 - 80 %
Product color	Black
Country of origin	Indonesia
Sound pressure level (printing)	55 dB
Needles	18 (2 x 9)
Print technology	Dot matrix
Connectivity technology	Wired
Pallet width	800 mm
Pallet height	2250 mm
Pallet length	1200 mm
Pallet weight	0 g
Pallet width (UK)	1000 mm
Quantity per pallet	14 pc(s)
Quantity per pallet (UK)	21 pc(s)
Quantity per pallet layer	2 pc(s)
Harmonized System (HS) code	84433210
Quantity per pallet layer (UK)	3 pc(s)
Package depth	735 mm
Package width	455 mm
Package height	300 mm
Package weight	12160 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	375 mm
Width	612 mm
Height	177 mm