Epson FX-2190IIN Network Guide

Messages Cause/What to do
Invalid file.
Cause:
You are not importing a certificate file in X509 format.
What to do:
For more information on the certificate, see the website of the certificate authority.
Cause:
The file you have imported is too large. The maximum file size is 5KB.
What to do:
If you select the correct file, the certificate might be corrupted or fabricated.
Cause:
The chain contained in the certificate is invalid.
What to do:
For more information on the certificate, see the website of the certificate authority.
Cannot use the Server Certificates that
include more than three CA
certificates.
Cause:
The certificate file in PKCS#12 format contains more than 3 CA certificates.
What to do:
Import each certificate as converting from PKCS#12 format to PEM format, or import
the certificate file in PKCS#12 format that contains up to 2 CA certificates.
The certificate has expired. Check if the
certificate is valid, or check the date
and time on your printer.
Cause:
The certificate is out of date.
What to do:
❏ If the certificate is out of date, obtain and import the new certificate.
❏ If the certificate is not out of date, make sure the printer's date and time are set
correctly.
Private key is required.
Cause:
There is no paired private key with the certificate.
What to do:
❏ If the certificate is the PEM/DER format and it is obtained from a CSR using a
computer, specify the private key file.
❏ If the certificate is the PKCS#12 format and it is obtained from a CSR using a
computer, create a file that contains the private key.
Cause:
You have re-imported the PEM/DER certificate obtained from a CSR using Web Config.
What to do:
If the certificate is the PEM/DER format and it is obtained from a CSR using Web Config,
you can only import it once.
Setup failed.
Cause:
Cannot finish the configuration because the communication between the printer and
computer failed or the file cannot be read by some errors.
What to do:
After checking the specified file and communication, import the file again.
FX-890IIN/FX-2190IIN/FX-2175IIN Network Guide
Solving Problems
58

Epson FX-2190IIN Specifications

General

Color	-
Bitmap fonts	Draft, OCR-B, Roman, Sans Serif
Character sets	Italic, PC437, PC850, PC858, Roman 8
Character pitch	10, 12 cpi
Built-in barcodes	CODABAR (NW-7), Code 128 (A/B/C), Code 39, Industrial 2/5, Matrix 2/5, POSTNET, UPC-A, UPC-E
Maximum resolution	240 x 144 DPI
Number of characters	42
Maximum number of copies	6 copies
Maximum print speed (NLQ)	115 cps
Maximum print speed (draft)	612 cps
Maximum printing width (columns)	136
Print yield	12 characters
Print direction	Bi-directional
Ribbon life (black, draft)	12 million characters
Mean time between failures (MTBF)	25000 h
Sustainability certificates	ENERGY STAR
Standard interfaces	Ethernet, Parallel, USB
Paper tray media types	Envelopes
Single sheet thickness range	0.06 - 0.14 mm
Continuous paper thickness range	0.46 - 0.46 mm
Multi-part paper thickness range	0.12 - 0.46 mm
AC input voltage	198-264 V
Power consumption (standby)	10 W
Power consumption (typical)	55 W
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	5 - 35 °C
Storage relative humidity (H-H)	30 - 60 %
Operating relative humidity (H-H)	10 - 80 %
Product color	Black
Country of origin	Indonesia
Sound pressure level (printing)	55 dB
Needles	18 (2 x 9)
Print technology	Dot matrix
Connectivity technology	Wired
Pallet width	800 mm
Pallet height	2250 mm
Pallet length	1200 mm
Pallet weight	0 g
Pallet width (UK)	1000 mm
Quantity per pallet	14 pc(s)
Quantity per pallet (UK)	21 pc(s)
Quantity per pallet layer	2 pc(s)
Harmonized System (HS) code	84433210
Quantity per pallet layer (UK)	3 pc(s)
Package depth	735 mm
Package width	455 mm
Package height	300 mm
Package weight	12160 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	375 mm
Width	612 mm
Height	177 mm