Epson FX Series Product Support

GENERAL
6.9 INSTALL CHECKLIST
• Unpack Printer.
a Check for shipping screws (MX).
• Install the Ribbon.
a Load paper (continuousor cut sheets,depending on model).
• Plug in Printer and turn ON.
• Operate Control Panel Switches.
• Run SELF-TEST.
• Connect Printer to Computer.
6.10 REVISIONS TO MANUAL
Revision pages will be sent to you so that you can keep your manual up to
date, when a page is changed or added, a revision letter added to the
bottom of the page identifies it as a revised page. The actual change is
identified as follows:
Text Black Vertical Bar in Margin
Tables Black Vertical Bar Left of Changed Date
Illustrations Small Black Square Below Illustration
If the same page is changed by a later revision, the first marks are removed,
and new ones are added to identify only the new information.
When the entire manual is re-issued due to an extensive revision, a revision
letter and revision date will be added to the front cover. All change bars will
be removed and all revision letters will be removed from the page numbers.
EPSON PRINTERS
NOTES:
6-28

Epson FX Series Specifications

General

Connectivity	Parallel
Paper Handling	Friction feed, Tractor feed
Emulation	Epson ESC/P
Noise Level	55 dB(A)
Print Method	Impact dot matrix