Epson FX Series Product Support

EPSON PRINTER
A
i
6. Turn poweroff, replace ribbon cartridge, insert paper, and turn power back on.
The paper out tones sound.
YES NO
Proceed
to RAP 2.6
7. The paper feed motor is turning (paper is being fed through printer).
YES NO
Proceed
to RAP 2.7
8. On the control panel, the Power, Ready, and On Line LEDs are on; the Paper Out LED
is off.
YES NO
Proceed to RAP 2.8
9. Runself test. Turn power off. Press and hold the Draft/LFor LF switch. Turn power
on. Release switch when printerstartsto print(on MX-100,hold LF switch until 5 lines
print).
Print operation is executed.
YES NO
Proceed to RAP 2.9
SERVICE CALL PROCEDURES
B
I
10. One line of paper feed occurs for each line of print.
YES NO
Proceed to RAP 2.7
11. Printing isof good quality for several consecutive lines (see Figure 1-2).
YES NO
Proceed to RAP 2.9
! "' ()*+,-. /01234567/
<)*+,-./01234567)
"my.ii- ()*+,-./012345678(
()*+,-./0123456789:7^
^•/.«<' ()*+,-. /0123456789: ;
7.S< '()*+,-. /0123456789: ; O
//Ol23456789:/<= >?GABCDEF6H
1/0123456789 s; <= > ?QABCDEFGH1
2Z4567891 / <= >?QABCDEFGHIJ
y456789:/<=>?QABCDEFGH1JK
)456789:;<=>?@ABCDEFGH1JKL
M56789:/<=>?eABCDEFGHIJKLM
Figure 1-2 Draft Print Quality
1-3

Epson FX Series Specifications

General

Brand	Epson
Model	FX Series
Category	Printer
Language	English