68 Specifications
Digital halftoning
AAS (Auto Area Segmentation,
enable/disable selectable)
3 error diffusion modes (A, B, and C)
4 dither patterns (A, B, C, and D) for
bi-level and quad-level data
(2 downloadable dither patterns)
Gamma correction
2 types for CRT display
3 types for printer
1 type user-defined
Color correction
1 type for CRT display
3 types for printer (available in color
byte sequence mode and color line
sequence mode)
1 type user-defined
Interfaces
SCSI 2 (half pitch 50-pin connectors)
USB 2.0 (Type B receptacle connector)
IEEE 1394 (FireWire), optional
10Base-T/100Base-TX, optional
Light source
Xenon gas cold cathode fluorescent
lamp
Reliability
100,000 cycles of carriage movement
(main unit MCBF)
Dimensions
Width: 25.8 inches (656 mm)
Depth: 18.0 inches (458 mm)
Height: 6.2 inches (158 mm)
Weight
Approximately 29.8 lb (13.5 kg)
Electrical
Input voltage range
100 to 120 VAC: 90 to 132 VAC
220 to 240 VAC: 198 to 264 VAC
Rated frequency
50 to 60 Hz
Rated current
100 to 120 VAC: 0.8 A
220 to 240 VAC: 0.3 A
Power consumption
Operating: Approximately 50 W
Approximately 75 W
with ADF unit
Standby: Approximately 7.5 W
Environmental
Temperature
Operating: 41 to 95 °F (5 to 35 °C)
50 to 89 °F
Storage: –13 to 140 °F
(–25 to 60 °C)
Humidity (without condensation)
Operating: 10 to 80%
Standby: 10 to 85%
Operating conditions
Ordinary office or home conditions.
Avoid dust, direct sunlight, and
proximity to strong light sources.
Safety Approvals
120 V model
Safety: UL 1950
CSA C22.2 No. 950
EN 60950
EMC: FCC part 15
subpart B class B
CSA C108.8 class B
EN 55022 (CISPR Pub
22) Class B
AS/NZS 3548 class B
230 V model
Safety: EN 60950
EMC: EN 550022 class B,
EN 61000-3-2, 3-3
To Next Page
Loading...
