Home > Placing Originals on the Scanner
Loading Documents
Document Specifications
Loading Documents Directly
Loading Document with Carrier Sheet
Loading Cards
You can load your original documents into the input tray to scan multiple pages quickly.
Before loading documents into the input tray, see Document Specifications to make sure your original documents can be
loaded.
Document Specifications
The table below lists the sizes of paper you can load into the input tray. You can load up to 75 sheets (a stack thickness
of 7.5 mm/0.3 inch or less).
Only load sheets that are all the same size.
Paper size Measurements
A4 210 × 297 mm (8.3 × 11.7 inches)
Letter 215.9 × 279.4 mm (8.5 × 11 inches)
Legal 215.9 × 355.6 mm (8.5 × 14 inches)
B5 182 × 257 mm (7.2 × 10.1 inches)
A5 148.5 × 210 mm (5.8 × 8.3 inches)
A6 105 × 148 mm (4.1 × 5.8 inches)
A8 (Portrait)
*
52 × 74 mm (2.0 × 2.9 inches)
Business card up to 10 pieces per stack
up to 3.8-mm (0.15-inch) stack thickness
Plastic card (including emboss card)
(Portrait)
**
54 × 85.6 mm (2.1 × 3.3 inches)
up to 1 piece per stack
up to 1.5-mm (0.06-inch) thickness
* For Windows only.
** For scanning of plastic cards with shiny surfaces, the results are not guaranteed.
Load only documents that meet the following specifications.
Size Width: 52 to 216 mm (2.0 to 8.5 inches)
Length: 73.7 to 914.4 mm (2.9 to 36.0 inches)
Weight
Auto Feeding: 50 to 130 g/m
2
(0.1 to 0.3 lb/m
2
)
Manual Feeding: 45 to 200 g/m
2
(0.1 to 0.4 lb/m
2
)
Paper type High-quality paper, Recycled paper
Documents with the following conditions cannot be loaded directly (without using the carrier sheet).
To Next Page
Loading...
Need help?
General
