Epson L565 - Securing the Paper Support; Paper Support Sub

Confidential
Appendix Protection for Transportation 82
L565/L566 Series Revision A
5.3.2 Securing the Paper Support / Paper Support Sub
 Purpose
To prevent damaging the Paper Support/Paper Support Sub by the shock during transportation.
 Risks if it is not performed
The Paper Support/Paper Support Sub will be scratched and the abrasion powder will be produced due to the
shock during transportation.
 Preparation
Prepare two pieces of strong tape

Length: 65 mm, width: 22 mm, fold one end 5 ± 2 mm.
 Method

Attach strong tape along the shapes of the Tank Assy as shown in Fig5-4 to Secure the Stacker Cover with strong
tape (x2)
Figure 5-4. Securing the Paper Support / Paper Support Sub
Housing Left
Strong tape
Folded ends