Epson L575 - Chapter 4 - COMMAND SEQUENCE; 4.1 Raster Graphics Modes

2016/09/02
Revision: 1 Page: 14
CHAPTER 4: COMMAND SEQUENCE
4.1 Raster Graphics Modes
The following two modes are available for raster graphics commands:
1) Non-compressed mode - the print data is transferred without being compressed.
Effective for printing data with a low compression ratio, such as photographs.
2) Run-length encoded mode - the print data is transmitted after run-length encoding compression.
Effective for printing data such as graphs and figures, in which patterns appear repeatedly.