Epson L575 - Select Paper Path PP 03 H 00 H 00 H M1 M2

2016/09/02
Revision: 1 Page: 60
6.1.10 Select paper path “PP” 03H 00H 00H m1 m2
[Format]
“PP” 03H 00H 00H m1 m2
[Parameters]
The parameter “m1” and “m2” are each one byte binary data.
The “m1” describes paper is continuous type or a single sheet in CSF or a manual inserted sheet as shown
below.
Paper m1 m2
Cut Sheet Rear 01H 00H
Auto Select
(Choose A4 or Letter)
01H FEH
[Function]
Select paper path to be used for the temporary default.
The previous setting will be kept if the parameter “m1” and “m2” exceeds its limit.
*1: The printer feeds a paper from 1st Bin first, then feeds from 2nd Bin when there are no papers in 1st Bin.
If 2nd Bin papers run out, the printer status turns to Paper Out Error.