Epson L575 User Manual

2016/09/02
Revision: 1 Page: 28
5.1.6 Control paper loading/ejecting ESC EM n
ESC EM n Ver 1.00
[Name] Control paper loading/ejecting [Setting]
[Format] 1BH, 19H, n
[Range of Definition] n=52H
(="1", "R")
[Function] 1) The CSF (cut sheet feeder) receives the following commands, according to the value of n:
n=52H eject paper
2) If n has any value other than the above, this command is ignored.
3) The ESC EM “R” will only eject paper fed from the CSF. If the paper being fed was not
fed by the CSF, this command is ignored.
4) Bin selection settings apply to the next and subsequent paper feedings.
5) After the ESC EM “R” command ejects the paper, the printing position in the X direction is
set to the origin on the X axis.
[Initial State] -
[Related Commands]
[Setting] Commands whose settings are affected by this command.
None
[Setting] Commands that change the effects of this command.
Bin selection is reset to its initial state by the ESC @ command.
[Operation] Commands whose functionality is affected by this command.
None
[Operation] Commands that change the effects of this command.
None

Epson L575 Specifications

General

Print Technology	Inkjet
Functions	Print, Copy, Scan, Fax
Print Resolution	5760 x 1440 dpi
Scan Resolution	1200 x 2400 dpi
Fax Function	Yes
Ink Tank System	Yes
Weight	6.2 kg
Print Speed (Color)	15 ppm
Scanner Type	Flatbed colour image scanner
Connectivity	USB, Wi-Fi, Wi-Fi Direct
Paper Handling	100 sheets input tray, 30 sheets output tray
Paper Sizes	A4, A5, A6, B5, DL
Mobile Printing	Epson iPrint, Epson Email Print
Display	LCD
Print Speed (Black)	Up to 33 ppm