Epson L575 User Manual

2016/09/02
Revision: 1 Page: 56
6.1.5 Turn printer state reply on/off (Remote Mode) “ST” 02H 00H 00H m1
[Format]
“ST” 02H 00H 00H m1
[Parameters]
•
Parameter m1 is a one byte binary parameter, and indicates the setting as follows:
m1 Printer State Reply
10H Binary state reply Off
11H Binary state reply On
[Function]
-The default environment status transmission is set. See the paragraph of status transmission for the status transmission.
-This setting depends on interfaces that receive this command. For example, this command is received with the built-in Macintosh
serial interface; the status transmission for the built-in Macintosh serial interface is set.
-If the parameter m1 is out of range, or if setting of parameter m1 is not supported by the product, this command is ignored, and the
existing setting is maintained.
-This command will be ignored if this command is not supported.
-This command is only available in Remote Mode.
Auto interface select function
-If the status transmission is ON, the interface transmits the status whether the interface is selected or the interface is deselected
by the auto interface select function.

Epson L575 Specifications

General

Print Technology	Inkjet
Functions	Print, Copy, Scan, Fax
Print Resolution	5760 x 1440 dpi
Scan Resolution	1200 x 2400 dpi
Fax Function	Yes
Ink Tank System	Yes
Weight	6.2 kg
Print Speed (Color)	15 ppm
Scanner Type	Flatbed colour image scanner
Connectivity	USB, Wi-Fi, Wi-Fi Direct
Paper Handling	100 sheets input tray, 30 sheets output tray
Paper Sizes	A4, A5, A6, B5, DL
Mobile Printing	Epson iPrint, Epson Email Print
Display	LCD
Print Speed (Black)	Up to 33 ppm