2016/09/02
Revision: 1 Page: 75
7.11 Paper Count information
Item Byte (Hex) Value (Hex)
Header 1 36h
Parameter counter 1 n
Parameter n Paper count information
This field replies printed counts both sheets of pages and faces of printed.
The parameter <Paper count information> is a n-bytes binary code that consists of counts for printed all sheets, printed all
faces, color faces, monochrome faces and blank faces.
Note:
Utility prints (Status sheet, Nozzle check pattern and so on) are counted.
‘0xFFFFFFFF’ is replied if a counter is not supported for a printer.
A cancelled page in a printing job is counted.
< SKU that is not supporting borderless printing, parameter counter is 18h.>
Item Byte (Hex)
Description
Counts of all sheets to printed
(One is counted if two pages are printed in duplex.)
4 Not supported
(always 0xFFFFFFFF)
Counts of all faces to printed
(Two are counted if two pages are printed in duplex.)
4 Not supported
(always 0xFFFFFFFF)
Counts of color faces to printed 4 0 to 0xFFFFFFFE
Counts of monochrome faces to printed 4 0 to 0xFFFFFFFE
Counts of blank faces to fed 4 0 to 0xFFFFFFFE
Counts of all faces to scanned with the Auto Document Feeder(ADF) 4 0 to 0xFFFFFFFE
< SKU that is supporting borderless printing, parameter counter is 20h. >
Item Byte (Hex)
Description
Counts of all sheets to printed
(One is counted if two pages are printed in duplex.)
4 Not supported
(always 0xFFFFFFFF)
Counts of all faces to printed
(Two are counted if two pages are printed in duplex.)
4 Not supported
(always 0xFFFFFFFF)
Counts of color faces to printed
[For borders and borderless printing]
4 0 to 0xFFFFFFFE
Counts of monochrome faces to printed
[For borders and borderless printing]
4 0 to 0xFFFFFFFE
Counts of blank faces to fed 4 0 to 0xFFFFFFFE
Counts of all faces to scanned with the Auto Document Feeder(ADF) 4 0 to 0xFFFFFFFE
Counts of color faces to printed
[For borderless printing]
4 0 to 0xFFFFFFFE
Counts of monochrome faces to printed
[For borderless printing]
4 0 to 0xFFFFFFFE