2. Select the bin number by pressing the
Tear Off/Bin
button. The
light of the currently selected bin comes on.
Note:
You may be able to specify the bin number using your application
programs. See your software manuals for details.
Switching between continuous paper and the
cut-sheet feeder
You can easily switch between continuous paper and cut-sheet
feeder operation without removing the continuous paper.
Switching to continuous paper
1. If any single sheets are in the paper path, press the
Load/Eject
button to eject them.
2. Move the paper release lever to the push tractor position.
3. Move the paper selection lever to the continuous paper position.
Note:
When you print several pages of continuous paper, guide the paper over
the center support and out the back of the printer as it prints.
R
Sunflower-P
Rev.c A5
size Chapter 4
01/09/96 pass 1
Using Printer Options
4-7
To Next Page
Loading...
