Epson LQ-2070 - Installing the Double bin Cut-Sheet Feeder

9. Lift up the center support and select single sheet or continuous
paper by moving the paper selection lever as shown below.
Note:
When the cut-sheet feeder is installed, you can still load single sheets
using the top paper guide or the front paper slot.
The cut-sheet feeder loads paper when you send data to the
printer (as long as the
Pause
light is not on). You can also load
paper by pressing the
Load/Eject
button.
Installing the double bin cut-sheet feeder
You can connect the high capacity cut-sheet feeder to the second
bin cut-sheet feeder to create a double bin cut-sheet feeder. See the
cut-sheet feeder manuals for more information.
You cannot use the second bin cut-sheet feeder without the high
capacity cut-sheet feeder.
1. Install the assembled double bin cut-sheet feeder on the printer.
See “Installing the high capacity cut-sheet feeder” earlier in
this chapter.
4-4
L
Sunflower-P
Rev.c A5
size Chapter 4
01/09/96 pass 1
4-6
Using Printer Options