Removing paper from the tractor
1. To remove continuous paper, press the
Tear Off/Bin
button to feed
the paper’s perforation to the tear-off edge of the printer cover.
Note:
If the page perforation is not properly aligned with the tear-off edge,
you can adjust the tear-off position using Micro Adjust. See
Chapter 3.
2. Tear off the paper.
3. Press the
Load/Eject
button to feed the continuous paper
backward out of the printer and into the standby position.
c
Caution:
Make sure you tear off your printed document before pressing the
Load/Eject
button. Reverse feeding several pages at a time may
cause a paper jam.
Switching Between Continuous Paper and Single
Sheets
When using the push tractor in the front or rear position, you can
easily switch between continuous and single-sheet printing
without removing the paper.
L
Sunflower-P
Rev.c
A5 size Chapter 2
01/19/96 pass 2
2-30
Paper Handling
To Next Page
Loading...
