Loading single sheets from the front
1. Move the paper release lever to the single-sheet position. Make
sure the paper path guide rests against the paper guide.
2. Open the front paper guide.
3. Turn on the printer.
4. Position the left edge guide as shown below. (Printing starts at
the arrow mark.) See the Appendix for more information on
the left margin position. Adjust the right edge guide to match
the width of your paper.
2-10
2-11
R
Sunflower-P
Rev.c
A5 size Chapter 2
01/19/96 pass 2
Paper Handling
2-7
To Next Page
Loading...
