5
Changing Printer Settings From the Printer’s Control Panel
5-3
R4C3730
Rev. C
A5 size CHAP5.FM
8/23/99 Pass 0
R
Proof Sign-off:
<Crestec> _______
<Kimura> _______
<Crestec> _______
2. To select a font, press the
Font
button until the two Font lights
indicate the font you want as shown below.
Note:
You cannot use the
Font
button to directly select OCR-B, Orator,
Orator-S, Script C, Roman T, or Sans Serif H. To select one of these
fonts, you must first use the default-setting mode to register it as
the “other” font. The default “other” setting is Roman T. For
instruction on using the default-setting mode, see “About Your
Printer’s Default Settings” on the next page.
3. Press the
Condensed
button to turn the condensed mode on
or off. The table below shows normal and condensed printing.
Font lights Font
o o n Draft
o n o Roman
o n n Sans Serif
n o o Courier
n o n Prestige
n n o Script
n n n Other
n = On,
o = Off
* other means the font selected in the
default-setting mode
Condensed mode Sample
Off
On
To Next Page
Loading...
