Epson LQ-2080 - Loading Paper Onto the Front Push Tractor

2-12
Printing on Continuous Paper
R4C3730
Rev. C
A5 size Chap2.fm
8/23/99 Pass 0
L
Proof Sign-off:
<Crestec> _______
<Kimura> _______
<Crestec> _______
Loading paper onto the front push tractor
To load paper onto the front push tractor, follow these steps:
1. Open the front paper guide by pulling the tab at the center
of the guide. Then remove the guide by grasping both sides
and pulling it straight out of the printer. Check that the tractor
is installed in the front push position.
2. Set the paper release lever to the front push tractor position.
Also set the paper thickness lever (located under the printer
cover) to the proper position for your paper’s thickness.
2-24.eps
2-24a.eps