1
Setting Up the Printer
1-5
R4C3730
Rev. C
A5 size CHAP1.FM
8/23/99 Pass 0
R
Proof Sign-off:
<Crestec> _______
<Kimura> _______
<Crestec> _______
Positioning the continuous paper supply
Before using continuous paper, make sure you line up your paper
supply with the tractor feeder so the paper feeds smoothly into
the printer, as shown below.
Installing or Replacing the Ribbon Cartridge
This section describes how to install or replace the ribbon
cartridge. The installation and replacement procedures are the
same except that you need to remove the used ribbon cartridge
before you replace it with a new one.
EPSON recommends using genuine EPSON ribbon cartridges
(S015086). Products not manufactured by EPSON may cause
damage to your printer not covered by EPSON’s warranties.
w
Warning:
You will need to move the print head by hand to install or replace
the ribbon cartridge. If you have just used the printer, the print
head may be hot; let it cool for a few minutes before touching it.
When using the option When using the option
G2-8aaa.eps
To Next Page
Loading...
