1-4
Setting Up the Printer
R4C3730
Rev. C
A5 size CHAP1.FM
8/23/99 Pass 0
L
Proof Sign-off:
<Crestec> _______
<Kimura> _______
<Crestec> _______
❏ Place the printer near a wall outlet where you can easily
unplug the power cord.
Note for French-speaking users:
Placez l'imprimante près d'une prise de contact où la fiche peut être
débranchée facilement.
❏ Avoid electrical outlets controlled by wall switches or
automatic timers. An interruption in power can erase
information in the memory of your printer or computer.
Also avoid outlets on the same circuit as large motors or
other appliances that can cause voltage fluctuations.
❏ Keep the entire computer system away from potential
sources of electromagnetic interference, such as loudspeakers
or the base units of cordless telephones.
❏ Use a grounded power outlet; do not use an adapter plug.
❏ Make sure the paper path is clear and unobstructed before
you print on continuous paper. (See the next section.)
If you plan to use a printer stand, follow these guidelines:
❏ Use a stand that supports at least 26 kg (57.8 lb).
❏ Never use a stand that tilts the printer. The printer should
always be kept level.
❏ Position your printer’s power cord and interface cable so they
do not interfere with paper feeding. If possible, secure the
cables to a leg of the printer stand.
To Next Page
Loading...
