2
Printing on Continuous Paper
2-13
R4C3730
Rev. C
A5 size Chap2.fm
8/23/99 Pass 0
R
Proof Sign-off:
<Crestec> _______
<Kimura> _______
<Crestec> _______
3. Release the left and right sprockets by pushing the sprocket
lock levers backward.
4. Slide the left sprocket to the left margin of your paper using
the arrow mark inside the printer. (Printing starts at the arrow
mark.) Then pull the lever forward to lock it in place.
Note:
See “Paper alignment” and “Printable area” in Appendix C for
more information on the left margin position.
2-35a.eps
To Next Page
Loading...
