2
Printing on Continuous Paper
2-11
R4C3730
Rev. C
A5 size Chap2.fm
8/23/99 Pass 0
R
Proof Sign-off:
<Crestec> _______
<Kimura> _______
<Crestec> _______
2. Open the front paper guide by pulling the tab at the center
of the guide. Then remove the guide by grasping both sides
and pulling it straight out of the printer.
3. Insert the tractor into the printer’s mounting slots and press
down both ends of the tractor to make sure that it is firmly
seated.
You are now ready to load continuous paper onto the front push
tractor as described in the next section. To remove the tractor, see
page 2-17.
tab
2-22.eps
2-23.eps
To Next Page
Loading...
